It is also a pretty fantastic way of boosting the functionality of your Computer, incredibly if you are upgrading from a single core CPU to a dual or quad-core chip.Anti-Static Warning
The CPU and motherboard are each susceptible to electrostatic discharge (ESD) so assure that you put on an anti-static wristband once doing this upgrade process.
Gear Required
To adhere to the methods in this write-up you will need to have an anti-static wristband and potentially a philips screwdriver (dependent on how the CPU heatsink is fixed to the motherboard).
one) Unplug From Mains & Main Side Panel
To commence this process disconnect the Computer from the mains and lay the Computer on its side on a steady surface in advance of getting rid of the main side panel so that you need to have clear access to the Pc parts. The side panel will generally slide off as soon as 2 little thumbscrews have to have been taken out.
two) Determine CPU Heatsink & Unplug Fan Cable
The CPU heatsink is situated on the main board and consists of a fan connected to a metal heatsink which sits in direct get in touch with with the CPU. You must be able to see a cable connecting the fan to the board (will be a three or four pin connector) - this cable will have to be unplugged from the motherboard.
three) Clear away Heatsink
Now the fan cable has been unplugged you will desire to Eradicate the metal heatsink itself which will be attached to the motherboard by way of screws or pushpins at all 4 corners. If the heatsink is connected by screws then you will desire to loosen all 4 screws so that the heatsink can be lifted clear of the motherboard. If the heatsink employs the traditional Intel push-pin attachment then you will have to turn both pin 90 degrees clockwise (this will now release the locking pins and allow the heatsink to be eliminated).
four) Eliminate Present Processor
As soon as the heatsink has been eliminated you will be able to see the top of the CPU sitting within the socket - you will want to unclip the metal locking bar from the socket and raise the lever so that you can flip the top of the metal bracket out and obtain access to the CPU. The processor will will need to be lifted out extremely gently to prevent damaging any of the pins on the motherboard.
5) Match New CPU
Fitting the new processor is the reversal of the removal procedure but take care to make sure that the processor is aligned the right way ahead of fitting. You will discover that there are 2 grooves in the CPU - these will line up with 2 groves in the socket and the CPU ought to be lowered into the socket gently. The metal cover can now be flipped down and locked in spot with the metal lever.
six) Re-Attach Heatsink & Side Panel
Use the heatsink that came with the new CPU to guarantee that the processor will be the right way cooled and Match this into the motherboard making use of the pushpins (comply with Intel instruction booklet) or screws.
Crucial: Bear in mind to attach the fan cable to the motherboard
Reattach the side panel and plug the Computer back into the mains able to be powered on.
7) Power On & Check CPU
Assuming your new CPU is compatible with your motherboard the Computer will need to power on as traditional and commence loading your operating technique. In some motherboards a BIOS update could possibly be Desired in order for the board to recognise the new CPU effectively. The moment the method has powered on, Test the Pc properties in Windows (Commence > Pc > Technique Properties) and Test that the processor data is getting reported properly.
Last Thoughts
Following this tutorial and upgrading the CPU in your method will hopefully give you a great efficiency boost if the replacement CPU is a more rapidly model and will require just saved you in the area of 25-40 GBP that this upgrade would expense in a regional Pc repair store.
David Hughes performs as a repair engineer for Pc Repairs Watford and has over six a long time practical experience in the IT trade carrying out Pc upgrades.
Tidak ada komentar:
Posting Komentar